Last Updated on July 27, 2022 by Thomas James
Do you have a screwdriver? If so, you can unlock your car door with it! If you have a car with a standard door key, there are usually two ways to open it: inserting the key into the lock and turning it or using a screwdriver to pry open the door’s hinges. One downside to this method is that if your keys are lost or stolen, you’ll have to replace them both – which can be expensive. This blog post will teach you how to unlock a car door with a screwdriver.
If your car doesn’t have a keyless entry, there’s a good chance you can unlock the door with a screwdriver. Before you start, check to see if your car has a Torx screwdriver bit, which is the most common type of screwdriver bit. You’ll also need to locate the screws that hold the door handle in place. Once you have your tools and know where the screws are, remove them and open the door. Let’s discuss them in detail.
How To Unlock A Car Door With A Screwdriver
Before you start thinking about the things you’ll need or anything else, remember that your safety comes first. However, because the screwdriver may scrape or harm your paintwork, you can wind up destroying your car. The most important thing to remember is always to wear gloves to protect your hands and fingers from being injured if the screwdriver slips.
For best results, you should use a screwdriver with a Torx bit, which is the most common type of screwdriver bit. It’s important to note that not all screwdrivers have a Torx bit, so make sure you’re buying one that does.
There are two types of screwdriver bits: Phillips and Torx. Phillips bits are the most common type of screwdriver bit, but they’re not as strong as Torx bits. The screwdriver bit you choose will depend on what kind of car you have.
To find the screws that hold the door handle in place, you’ll need to look for the screws that are located on the inside of the door frame. Let’s summarize in steps!
You Also Like: How To Fix A Stuck Manual Car Seat?
Step 1: The Unlock Key’s Location
It’s pretty simple to do because we’re all so familiar with our own automobiles and know where every button, nook, and cranny is. Start by locating the screws that hold the door handle in place. These screws are located on the inside of the door frame. If your car doesn’t have a keyless entry, you’ll need to locate the screws that hold the door handle in place.
Step 2: Wedge the Door and Frame Apart with a Screwdriver
This stage necessitates caution because you must be as careful as possible to avoid damaging your vehicle. In order to install the screwdriver, you must insert your tool or ruler between the door and the frame of your car. When you try to wedge the door with the screwdriver, you apply a lot of pressure on both the door and the locking mechanism, which might shatter the locking mechanism or even bend the door. Now all you have to do is carefully slip the screwdriver into the upper side of the door. You should press the screwdriver beyond the rubber seal on your car until you see its tip inside.
Step 3: Push the Unlock Button with the Tool
You’ll need to adjust your wedge to the angle at which you’ll be placing your tool. The electronic unlock keys are the easiest to use because all you have to do is push them down, and your automobile will open.
If you can’t reach the electronic keys, you’ll have to attempt opening the manual ones, which will require you to move your coat hanger around until you can pull the key out and open your car.
Step 4: Before you open the door, take out your tool and wedge it back in place
We can’t emphasize this step’s importance, especially if you open the door with the screwdriver and tool inside. Your locking mechanism is readily broken. Repairing it is prohibitively expensive. As a result, it’s critical to remove the tool you inserted, remove the screwdriver, and finally open the door when it returns to its normal position.
After reading this article, you should have learned how to unlock a car door with a screwdriver. The process is simple, but it’s important to remember that you should only attempt this if you’re confident that you can handle the situation without any problems. Thank you for reading. We would love to hear from you!