Last Updated on July 25, 2022 by Thomas James
Are you tired of getting cold when you get into the car? We’ve got you covered if you have no idea how to turn on the heater in the car. You’ll easily learn how to turn on the heater from anywhere in the car. Automobile manufacturers are constantly striving to provide the best possible user experience. Each design, such as heating, air conditioning, filtration, or entertainment, is always developed by the company to ensure modern and convenient criteria.
There are many ways to turn on the heater in a car. Some cars have one button for the heater, and others have two. The most common way is to press and hold the heater button until the heater turns on. If you don’t know how to turn on the heater in your car, here you’ll find a detailed guide.
Most heating systems in cars work on the principle of convection. In this system, heat is transferred from a hot object to the surrounding air through the walls of the heater core. When the heater is turned on, the engine heats up the air in the car, which in turn heats up the heater core. The air then passes through the heater core and gets heated. The heated air then passes out of the vents and into the car.
The most common type of heater core is a finned tube. The fins are used to transfer heat from the engine to the air. The fins can be made of metal, plastic, or a combination of both.
The temperature usually takes 5–10 minutes to reach the desired level. If the time has passed more than 15 minutes, your car most likely has a heating problem. It can be quickly identified by the car’s heating time or temperature gauge. Drivers should refer to the temperature gauge in their car as it rises and falls while driving to understand car meters better.
You also like: How To Bypass Ignition Switch To Start Car?
How to Turn On Heater in Car[Step by Step]
The button is usually located near the steering wheel if you have a car with one button for the heater. Most vehicles also have an indicator light that will blink when the heater is on.
Press and hold the heater button until the indicator light blinks. If the indicator light does not blink, the heater may be broken.
If the indicator light is blinking, check the heater core. If it’s dirty, clean it. If it’s cracked, replace it. If it’s working fine, press and hold the heater button again.
Check the temperature gauge in your car. If the temperature is too low, increase the fan speed. If the temperature is too high, turn off the fan. If the temperature is within the normal range, wait for the temperature to drop to the desired level.
Wait for the temperature to reach the desired level. If the temperature does not reach the desired level after waiting for a few minutes, turn off the fan. If the temperature is still not at the desired level, repeat steps 1–5.
You also like this article: How To Fix Exhaust Pipe Without Welding?
When the thermostat is broken, the engine cannot cool down properly. The heater will not be able to function correctly. You should immediately contact a mechanic to have the thermostat replaced.
If the heater core is cracked, the engine will not be able to heat up the air. The temperature gauge will not be able to show the correct temperature.
If the heat exchanger is damaged, the engine will not be able to heat up the air. The temperature gauge will not be able to show the correct temperature.
If the heater core is dirty, the engine will not be able to heat up the air. The temperature gauge will not be able to show the correct temperature.
To pinpoint the source of the overheating, a certified mechanic must conduct a thorough investigation. The broken component can be repaired or replaced if the mechanic’s advice is followed.
Also, read this article: How To Increase CFM On Air Compressor?
We hope you enjoyed our article on how to turn on the heater in a car. Turning on the heater in the car is not difficult. Most people who have problems with heaters are not aware of where the heater is located. We hope this article will help you locate the heater in your car. As I have noted, many factors affect the functioning of a car’s heater. Knowing the causes of heater failure is essential so you can avoid them. Thank you for reading. We would love to hear from you!